News
Shopping trolley wheels: how to replace them and what to measure
How to take a worn shopping trolley wheel off and fit a new one, what to measure before you order, and when it is the axle that needs replacing.

Most shopping trolley wheels clip onto a stub axle and pull straight off, so replacing one takes a minute and no tools. Before you order, measure the old wheel's diameter and the hole in its centre, and check whether the wheel sits on a stub axle or on a through axle with end caps. We stock replacement wheels in two sizes and an axle kit, and this is how to fit them.
First: which kind of wheel do you have?
Clip-on wheels sit on a short stub axle on each side of the frame and are held by a spring clip inside the hub. They are the kind on nearly all two wheel folding trolleys, including ours. You pull them off to fold the trolley flat, and that is also how you replace them.
Through axle wheels sit on a steel rod that runs right across the frame, held on by a cap or a split pin at each end. They are found on older trolleys and on some four wheel frames. Replacing them means replacing the axle too, which is why we sell an axle and wheel kit.

How to replace a clip-on wheel
- Tip the trolley on its side with the wheel facing up.
- Pull the old wheel straight off the stub axle. If it is stiff, twist as you pull; the clip inside the hub is what holds it.
- Wipe the axle and check it is straight and not worn thin. A bent axle will wear the new wheel quickly.
- Push the new wheel on until you feel it click. Spin it; it should turn freely with no wobble.
- Do the other side at the same time. Wheels wear as a pair and a new wheel next to an old one pulls to one side.
What to measure before you order
- Wheel diameter, edge to edge across the tread. Ours come as medium and large; measure yours and pick the nearest.
- The hole in the hub, or the diameter of the stub axle. Universal clip-on wheels fit the common axle sizes; if yours is unusual, a through axle kit is the fix.
- Hub depth, from the inside face to the outside. Too shallow and the clip will not engage.
Our replacement trolley wheels are sold in pairs in medium and large, with a plastic hub and a foam tread for a quiet roll, and clip on without tools. They fit our trolleys and most other standard two wheel trolleys.
When it is the axle, not the wheel
If the wheel wobbles even when new, or the trolley pulls to one side, look at the axle. A bent stub axle can sometimes be straightened in a vice; a worn through axle needs replacing. The axle kit comes with one large wheel and two axles. Slide the old axle out after removing the end caps, slide the new one through the frame and the wheels, and fit the caps.
Making wheels last
- Do not overload. A 25 kg load on a trolley rated for 25 kg is fine; a 40 kg load flattens the tread and bends the axles.
- Pull the trolley on its wheels, do not drag it up kerbs on the frame.
- Rinse grit out of the hubs after a wet day. Grit grinds the plastic bearing surface.
- Store it indoors. Foam treads harden in the cold and crack in the sun.
Questions people ask
Can you replace the wheels on a shopping trolley?
Yes. On most two wheel trolleys the wheels clip onto a stub axle and pull straight off; a new pair pushes on until it clicks. No tools are needed.
Are shopping trolley wheels universal?
Mostly. Clip-on wheels fit the common stub axle sizes. Measure the old wheel's diameter and the hole in its hub before you order.
How much do replacement trolley wheels cost?
Under £10 for a pair, or for an axle kit with a wheel.
Why does my shopping trolley pull to one side?
One wheel is more worn than the other, or an axle is bent. Replace wheels in pairs and check the axle is straight.
Can I replace the bag instead of the trolley?
Often, if the bag attaches with Velcro or clips. Many of our trolleys have detachable bags; contact us with the model name and we will tell you if a bag is available on its own.

















